TM 11-6625-3087-12
3-11. REPLACE BOTTOM BUMPERS AND TILT STANDS.
DESCRIPTION
This procedure covers: Remove. Install.
REMOVE
1. Place equipment on side.
2. Lift tab (1) and slide bumper (2) inward.
3. Pull bumper (2) out of bottom cover
(3).
4. Remove stand (4) from bumper (2).
INSTALL
1. Replace stand (4) with bend facing away
from bottom cover into bumper (2).
2. Align three studs on bumper (2) with
three holes on bottom cover (3).
3. Slide bumper (2) outward until it locks.
END OF TASK
3-9
Previous Page
