TM 11-6625-3087-12
2 - 1 0 . LOW DISTORTION MEASUREMENT.
NOTE
To insure optimum performance, keep cable lengths as short as possible. Try to use the
same power source for the Level Meter and the unit under test.
1. On Level Meter, press RECALL ( 17) then number 0 ( 16) push buttons.
The maximum input power must not exceed +27dBm or damage to internal circuitry may
result.
2. On Level Meter, select desired TERMINATION (21).
When using BNC input, use only 75 BNC plugs. Use of other impedance plugs may
damage Level Meter.
NOTE
Only 124 or 135
input may be used at one time.
3. On Level Meter, select desired UNIT of measurement (5).
2-22
Previous Page
