TM 11-6625-486-14&P
frequencies covered by the filmstrip. The other columns
c. Setting Frequency Meter to Desired Harmonic
give harmonic frequencies covered by the range in use.
In figure 3-4, the harmonics given are the second,
tables that give the harmonic multiples of the basic
fourth, and eighth. The harmonics given will be different
fundamental frequencies (125 to 250 kHz, 2.5 to 5.0
for each range. If these tables are lost, the harmonic
MHz, and 65 to 130 MHz) on the filmstrip. The top of
frequencies of any given dial setting can be found by
each page in the calibration tables (fig. 3-4) gives the
multiplying the fundamental
frequencies covered on that page.
The left-hand
column of these tables gives the fundamental
Previous Page
